Silver anodes – Technische Werkstoffe

02 Product information

Details on
Silver anodes.

It is allowed to manufacture anodes up to 600 mm long (a multiple of 100 mm) with a width of 100 and 150 mm.

Anodes are made with two holes in diameter, mm:

6 ± 0.5 for anodes up to 3 mm thick;
10±0.5 for anodes 3-6 mm thick;
15±0.5 - for anodes with a thickness of 6 mm.

The openings on the anodes are located at a distance (13.0 ± 2.0) mm from the upper edge and at a distance (15.0 ± 2.0) mm from the lateral edges, counting from the centers of the holes.

At the request of the consumer, anodes are made without holes, with one or four holes.

Thickness, mm		Width, mm		Length, mm		Weight of one anode, g (reference)	Silver content %, not less than
Nomin. Sm.	Pre-off.	Nomin. Sm.	Pre-off.	Nomin. Sm.	Pre-off.	Weight of one anode, g (reference)	Silver content %, not less than
2	-0,15	50	±5	100	±5	103,8	99,99
2	-0,15	50	±5	200	±5	208,8
2	-0,15	100	±5	200	±5	418,8
2	-0,15	150	±5	300	±5	943,8
3	-0,20	50	±5	100	±5	152,6
3	-0,20	50	±5	200	±5	310,0
3	-0,20	100	±5	200	±5	625,1
3	-0,20	150	±5	300	±5	1412,6
4	-0,30	50	±5	100	±5	203,4
4	-0,30	50	±5	200	±5	413,4
4	-0,30	100	±5	200	±5	833,4
4	-0,30	150	±5	300	±5	1883,4
5	-0,40	50	±5	100	±5	254,3
5	-0,40	50	±5	200	±5	516,8
5	-0,40	100	±5	200	±5	1041,8
5	-0,40	150	±5	300	±5	2354,3
6	-0,40	50	±5	100	±5	305,1
6	-0,40	50	±5	200	±5	621,1
6	-0,40	100	±5	200	±5	1250,1
6	-0,40	150	±5	300	±5	2825,1
7	-0,50	50	±5	100	±5	341,1
7	-0,50	50	±5	200	±5	709,0
7	-0,50	100	±5	200	±5	1444,0
7	-0,50	150	±5	300	±5	3281,5
8	-0,50	50	±5	100	±5	390,3
8	-0,50	50	±5	200	±5	810,3
8	-0,50	100	±5	200	±5	1650,3
8	-0,50	150	±5	300	±5	3750,3
10	-0,50	50	±5	100	±5	487,9
10	-0,50	50	±5	200	±5	1012,9
10	-0,50	100	±5	200	±5	2062,9
10	-0,50	150	±5	300	±5	4687,9