MaterialNickel electrolytic powdersView details 
PRODUCT PHOTO / PROVISIONAL01 Nickel and cobalt powders
Cobalt electrolytic powders.
Technical information on Cobalt electrolytic powders. Material data and supply forms on request.
Inquire about product02 Product information
Details on
Cobalt electrolytic powders.
Cobalt Electrolytic Gunpowders
Powder cobalt grade PC-1u is produced by electrochemical precipitation from aqueous solutions of metal salts with subsequent drying and heat treatment in a reducing medium in accordance with the requirements of technical conditions TU 1793-009-07622839-2008.
At the request of the customer, the powder can be produced both in accordance with the TU and according to additional requirements.
Characteristics of PC-1U cobalt powder
Average particle diameter (dcp)/ median distribution (dm), μm* |
Mass fraction of particles (%), specified sizes, μm ** |
Bulk density, g/cm3 |
||
≤45 |
45÷71 |
≥71 |
||
(32,0±5,0)/(30,0±5,0) |
at least 30 |
not more than 66 |
less than 4 |
at least 1.8 |
* determined by sedimentation.
** Determined by sieve analysis.
Chemical composition of cobalt powder PC-1u
Co, at least, mass |
Content of elements, not more than % of mass |
||||||
Ni |
Fe |
O |
Si |
Cu |
S |
Moisture |
|
99,35 |
0,4 |
0,45 |
0,300 |
0,020 |
0,040 |
0,008 |
0,15 |
Application
They are used in powder metallurgy for the production of permanent magnets, hard alloys, high-speed tool steels, heat-resistant corrosion alloys, as well as paint products.
Important for sourcingPurity, form, quantity and timing help us assess your inquiry.
03 More materials
Also of interest.
MaterialNickel electrolytic powdersView details 
MaterialCobalt thermochemical powdersView details 04 Inquiry
Your material.
Your specification.
Tell us the required purity, form and quantity so we can assess your request.