MaterialCobalt electrolytic powdersView details 
PRODUCT PHOTO / PROVISIONAL01 Nickel and cobalt powders
Nickel electrolytic powders.
Technical information on Nickel electrolytic powders. Material data and supply forms on request.
Inquire about product02 Product information
Details on
Nickel electrolytic powders.
NIKEL Electrolytic Gunpowders
Nickel powders are produced by electrochemical deposition from aqueous solutions of metal salts followed by drying and heat treatment in a reducing medium in accordance with the requirements of the technical conditions:
TU 1793-001-07622839-2002, brand PNE-1, PNE-1 "Lux";
TU 1793-005-07622839-2003, brand A-2;
TU 1793-007-07622839-2004, brand AE-II-BT.
At the request of the customer, the powder can be produced both in accordance with the TU and according to additional requirements.
Characteristics of nickel powders
Type of powder |
Average particle diameter (dcp)/median distribution (dm), μm* |
Mass fraction of particles (%), specified particle sizes μm** |
Bulk density, ρn, g/cm3 |
||
≤45 |
45÷71 |
≥71 |
|||
A-2 |
(19,6±4,0)/(17,5±4,0) |
90÷93 |
7÷10 |
- |
1,4 ÷ 1,6 |
AE-II-BT |
(27,4±4,0)/(26,4±4,0) |
80÷90 |
10÷20 |
- |
1,6 ÷ 1,8 |
PNE-1 |
(32,0±5,0)/(30,0±5,0) |
≥30 |
≤66 |
≤4 |
3,0 ÷ 4,0 |
PNE-1 LUX |
(42,0±5,0)/(40,0±5,0) |
30÷45 |
51÷66 |
≤4 |
|
* determined by sedimentation.
** Determined by sieve analysis.
Chemical composition of electrolytic nickel powder A-2
Ni, at least % of the mass. |
Content of elements, not more than % of mass. |
|||||||
Cu |
Fe |
Al |
Mg |
Si |
Sn |
Mn |
Pb |
|
99,0 |
0,050 |
0,050 |
0,005 |
0,010 |
0,006 |
0,005 |
0,005 |
0,005 |
Zn |
Cr |
Sb |
Ca |
S |
C |
O |
moisture |
|
0,005 |
0,005 |
0,001 |
0,020 |
0,008 |
0,100 |
0,500 |
0,300 |
|
Chemical composition of nickel electrolytic powder AE-II-BT, PNE-1, PNE-1 LUX
Ni, at least % of the mass. |
Content of elements, not more than % of mass. |
||||||
C |
Fe |
So |
Si |
Cu |
S |
O |
|
99,5 |
0,020 |
0,100 |
0,200 |
0,030 |
0,060 |
0,008 |
0,100 |
Application
They are used in powder metallurgy as a nickel-based ligament, for corrosion-resistant or non-magnetic grades of solid alloys, in the production of magnets, batteries, filter elements, electrical contacts, special coatings, dyes, catalysts, welding electrodes, composite adhesives, ferrites, as well as in the creation of wear-resistant coatings on aircraft engines.
Nickel electrodes made from the finest powders are also used in fuel cells. Here, the catalytic properties of nickel and its compounds are of particular importance. Nickel is an excellent catalyst for complex processes occurring in chemical current sources.
Important for sourcingPurity, form, quantity and timing help us assess your inquiry.
03 More materials
Also of interest.
MaterialCobalt electrolytic powdersView details 
MaterialCobalt thermochemical powdersView details 04 Inquiry
Your material.
Your specification.
Tell us the required purity, form and quantity so we can assess your request.