Tungsten–rhenium wire.

Technical information on Tungsten–rhenium wire. Material data and supply forms on request.

Technical inquiry

02 Product information

Details on
Tungsten–rhenium wire.

Wolfram-Rhenium alloy wire BP-20, BP-27

Chemical composition

Marka-BP-20	Mass share	Mass fraction of impurities, % more
Tubs and wires YAEO 021.15 TU	W main, Re - 19.25-20.75 %	W main, Re - 19.25-20.75 %
BP-27 VP Tubs and wire TU 48-19-274-77 Foil and strip TU 48-19-270-77	W main, Re - 24-30 %	Mg,Ca,Si,Al,Fe, Ni,Mo -0.05

Note: The sum of impurities includes - calcium, magnesium, nickel, iron, aluminum.

The diameter of the released wire is (20-2500) μm.
A wire with a diameter of less than 300 μm shall be wound on coils without knots and hinges.
A wire with a diameter of 300 microns or more should be wound in the bays.
On the coil or bay should be one piece of wire.
Minimum length of wire (2 - 500) m depending on the diameter of the wire.
Accounting for wire with a diameter of less than 400 μm is determined by the meter recorded when winding the wire.
Accounting for wire with a diameter of more than 400 μm is determined in kg.
The volume and cost of the goods is determined by the square footage and the contractual price of 1000 m - diameter less than 400 μm inclusive, weight and contractual price of 1 kg for wire with a diameter of more than 400 μm.

Important for sourcingPurity, form, quantity and timing help us assess your inquiry.

04 Inquiry

Tell us the required purity, form and quantity so we can assess your request.