MaterialZinc powderView details 
PRODUCT PHOTO / PROVISIONAL01 Non-ferrous metal powders
Molybdenum powder.
Technical information on Molybdenum powder. Material data and supply forms on request.
Inquire about product02 Product information
Details on
Molybdenum powder.
Powders of grades PM 99.95; PM 99.9 are designed for the production of sintered materials and the manufacture of products by forging, rolling, extrusion, etc.
The content of particles smaller than 5 μm is 92% min.
Passage through the grid 100 μm without residue. The bulk density of the powder: 0.8-1.8 g / cm3.
Loss of mass during calcination in hydrogen (oxygen and moisture) - no more than 0.2%.
Characteristics of powder compactibility:
- pressing density at a pressure of 300 MPa, g/cm3, at least 6.3
- pressing density at a pressure of 700 MPa, g/cm3, not less than 7.3
Chemical composition (Content of impurities, % not more)
| Marka. | Mo,% | Fe | Al | Ni | Si | Mg | Na | K | Ca | W |
| PM99.95 | 99,95min | 100 | 30 | 50 | 50 | 20 | 30 | 80 | 40 | 130 |
| PM99.9 | 99,90min | 140 | 50 | 50 | 50 | 30 | 150 | 500 | 70 | 200 |
The content of particles smaller than 5 μm is 92% min.
Important for sourcingPurity, form, quantity and timing help us assess your inquiry.
03 More materials
Also of interest.
MaterialZinc powderView details 
MaterialLead powderView details 
MaterialPN75YU23V powder (VKNA)View details 04 Inquiry
Your material.
Your specification.
Tell us the required purity, form and quantity so we can assess your request.